TRANSPORT DRAG CHAIN

1.3-2 Contact Customer Care at 1.844.4HYTROL

DC-82

Standard Specifications Optional Equipment

CHAIN - #80 single pitch conveyor chain (straight sidebar). CHAIN GUIDE - UHMW polyethylene. FRAME - 6 in. x 4 ga. powder-painted formed steel angle with 2 in. x 1/4 in. thick wall, chain support tube. 4 ga. formed coupling channels located at infeed and discharge ends of each module. MOTOR - 2 HP, 208/230/460/575V, 3 Ph. 60 Hz. gearmotor, located underneath in 5 ft. long module. DRIVE SPROCKET - Hardened #80 with 1 1/2 in. dia. steel shaft. BEARINGS - Sealed, pre-lubricated, self-aligning ball bearings on drive. CONVEYING SPEED - 30 FPM. CAPACITY - 5800 lbs. maximum at 30 FPM (2 HP maximum). NOT TO EXCEED CAPACITY IN CHART. FLOOR SUPPORTS - Supplied as optional equipment. Note: Product footprint may affect drive capacity. MAXIMUM UNIT LOAD-4000 lbs. FLOOR SUPPORTS - DC82S and DCDS Type floor supports are available with a wide range of adjustment. Specify top of chain elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. MOTOR - 3 HP maximum. CLOSED TAIL - Overall length will be affected. CONVEYING SPEED - Speeds other than 30 FPM will require gear box change (contact factory). Load Capacity Chart (Live) @ 30 FPM Total Load (lbs.) HP Up to 50' Up to 102' 2 5800 5500