ACCUMULATION ZERO-PRESSURE

10.19-1 Contact Customer Care at 1.844.4HYTROL

Accumulating Live Roller Conveyor

The model ABEZ is a horizontal belt- driven live roller conveyor, designed for applications that require accumulation of products without a build-up of line pressure. Product may be released in singulation or slug fashion. EZLogic Accumulation System Singulation, Slug, or Cascaded Slug Operation Dynamic Zone Allocation 4 Brake Rollers in Each Zone Adjustable MS-Type Floor Supports Available Between Rail Width 15" 21" 27" 33" 39" Overall Frame Width 18" 24" 30" 36" 42" Base Weight 670 739 808 877 946 Weight Per Foot (lbs.) 31 37 43 49 55 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. Note: Bed sections available in the following multiples: 12" Zones 1', 2', 3', 4', 5', 6', 7', 8', 9', and 10' 18" Zones 1 1/2', 3', 4 1/2', 6', 7 1/2', and 9' 24" Zones 2', 4', 6', 8', and 10' 30" Zones 2 1/2', 5', 7 1/2', and 10' 36" Zones 3', 6', and 9' Overall length must be divisible by zone length. Total Weight = 10 ft. base weight + Per foot weight x Extra length 48" Zones 4' and 8' 60" Zones 5' and 10' 72" Zones 6' 84" Zones 7' 96" Zones 8' 120" Zones 10' LEARN MORE TECHNICAL MANUAL

ABEZ

EZLOGIC ACCUMULATION SYSTEM

Hytrol's EZLogic , or Electronic Zero-Pressure Logic Accumulation System, combines the sensing accuracy of photo-electronics with discrete electronic logic control without the use of a PLC or pneumatic logic components. The EZLogic Accumulation System provides many features including: Zero-Pressure Accumulation of Product Zone Stop function is built in. Any zone may be transformed into a workstation by connecting a dry contact switching device to the auxiliary port of the EZLogic Zone Controller. This feature is always used at the discharge end of the conveyor line, and may be used at any other location where a zone stop is required. Selectable Modes of Operation Singulation Mode - Product separates while traveling down the conveyor and when it is released from the conveyor, creating a zone-length gap between products. Enhanced Slug Mode w/ Jam Protection - Product does not separate when traveling down the conveyor or when it is released from the conveyor. This allows higher product throughput at any given conveyor speed. Product will not separate on the conveyor even when accumulation has been activated at the discharge end. Cascaded Slug Release - Rather than releasing all zones simultaneously, this function introduces a momentary delay in the release of each zone, from discharge upstream. Dynamic Zone Allocation - Automatically adjusts the conveyor's zone length to accommodate the length of the product being conveyed. Improves conveyor efficiency and system flexibility. OTHER STANDARD COLORS Conveyor shown in Standard Gray.