11.16-4 Contact Customer Care at 1.844.4HYTROL
FLOOR SUPPORTS - MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support. CONVEYING SPEED - Other constant and variable speeds from 30 to 120 FPM. Over 120 FPM timing belt drive recommended. Capacity affected with speed change. DRIVE - 24 in. long drive section replaces standard 6 1/4 in. or 18 in. tangent on end of 190-NSPC or 190- NSPS. No change on 190-NSPSS. Specify RH or LH. GUARD RAILS - Adjustable Universal Channel Guard Rail, fixed channel or type A or B angle. Note: If product comes in contact with guard rails, product flow will be affected. POLY-TIER SUPPORTS - 36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. CEILING HANGERS - 5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. OPTIONAL TANGENTS - Available in 3 in. increments up thru 48 in. long.
190-NSPC, 190-NSPS, & 190-NSPSSPrevious Page