ACCUMULATION ZERO-PRESSURE

11.18-2 Contact Customer Care at 1.844.4HYTROL Load Capacity Chart 190-NSPEZC Overall Frame Width Capacity Per Curve (lbs.) 16" 150 18" to 30" 200 34" to 42" 300

FLOW

EZLogic Module

TYPE A MODULE ON OUTSIDE OF THE CURVE STANDARD TYPE B MODULE ON OUTSIDE OF THE CURVE OPTIONAL TYPE C MODULE ON INSIDE OF THE CURVE OPTIONAL TYPE D MODULE ON INSIDE OF THE CURVE

BED - Roller bed with 2 1/2 in. dia. tapered to 1 11/16 in. dia. x 14 ga. galvanized and 1.9 in. dia. roller x 16 ga. galvanized tube. Mounted in 9 1/2 in. x 12 ga. powder- painted formed steel channel frame. SLAVE-DRIVEN - Curves and spurs are slave-driven from drive shaft of model 190-NSPEZ conveyor. Shafts are coupled by chain coupling at bed joints. DRIVE SHAFT - 1 in. dia. steel shaft extends full length of conveyor, coupled with universal joints (U joints) at necessary intervals. DRIVE SPOOLS - 2 in. dia. Delrin spool held in place on drive shaft with spool spacers. DRIVE GUARD - Underside of drive shaft with spools and drive o-rings guarded full length of conveyor. DRIVE O-RING - 3/16 in. dia. polyurethane o-ring from drive spool to tread roller. BEARINGS - Sealed, pre-lubricated, self-aligning ball bearings with eccentric lock collar on drive shaft. Pre- lubricated ball bearings in tread rollers. ACCUMULATION ZONES - 24 in. long air controlled. 2 per curve. SPLICE ANGLE - Standard for connecting to 190-NSPEZ or 190-NSP. CAPACITY - Maximum load: See Capacity Chart below. FLOOR SUPPORTS - Supplied as optional equipment. FLOOR SUPPORTS - MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support. GUARD RAILS - Adjustable Universal Channel Guard Rail, fixed channel or type A or B angle. Note: If product comes in contact with guard rails, product flow will be affected. POLY-TIER SUPPORTS - 36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. CEILING HANGER - 5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. EZLOGIC - See EZLogic Components Page.

190-NSPEZC

Optional Equipment Standard Specifications