9 13/32 8 7/16 Overall Width Between Rail Width Overall Length 8' - 100' 21 38 1/4 Allow 12" 59 2 13-9/16" 22 3/4 4" Dia. Tail Pulley 2 1/8" Dia. Snub Idler 1.9" Dia. Tread Roller 4" Dia. Take-Up Pulley 8" Dia. Drive Pulley End Guard End Guard

SECTION "X-X" Set High Shown With Standard Drive (Located in First Bed Section 8' or Longer, From Infeed End) Set Low Shown With HIgh Performance Drive (Located in First Bed Section 9' or Longer, From Infeed End)

OVERALL LENGTH 8' - 100' END GUARD 4'' DIA. TAIL PULLEY 21-5/8''

14-7/8''

2-1/8'' DIA. SNUB IDLER 1.9'' DIA. TREAD ROLLER 6'' DIA. TAKE-UP PULLEY 8'' DIA. DRIVE PULLEY 68-1/4'' ALLOW 12'' 2'' END GUARD

OVERALL WIDTH BETWEEN RAIL WIDTH

1-1/2" 8-1/2"

SECTION "X-X"

ABEZ

ACCUMULATION ZERO-PRESSURE

11.19-2 Contact Customer Care at 1.844.4HYTROL Load Capacity Chart (Singulated) @ 65FPM HP Overall Frame Width 18" to 22" Overall Frame Width 24" to 30" Overall Frame Width 34" to 42" Total Load (lbs./ft.) Total Load (lbs./ft.) Total Load (lbs./ft.) Up to 50' Up to 100' Up to 50' Up to 100' Up to 50' Up to 100' 1/2 50 10 40 2 25 N/A 1 75 50 75 40 75 25 2 75 75 3 75 75 High Performance Drive Load Capacity Chart (Singulated) @ 65FPM HP Overall Frame Width 18" to 22" Overall Frame Width 24" to 30" Overall Frame Width 34" to 42" Total Load (lbs./ft.) Total Load (lbs./ft.) Total Load (lbs./ft.) Up to 200' Up to 300' Up to 200' Up to 300' Up to 200' Up to 300' 1 10 N/A 1 N/A N/A N/A 2 66 35 56 25 42 10 3 75 55 75 45 73 30 5 75 N/A 75 N/A 75 N/A Above load charts are based on singulated operational mode (50 percent max load flowing). If operated in cascade release mode, the length or load must be decreased appropriately. Example: For full slug: reduce load by 50 percent or reduce length by 50 percent, For cascade release: reduce length by approximately 40 percent or reduce load by approximately 40 percent. For loads over 75 lbs per ft, 140-SD belt is required.