ACCUMULATION MINIMUM-PRESSURE

11.9-4 Contact Customer Care at 1.844.4HYTROL BED - Roller bed with 1 3/8 in. dia. roller x 18 ga. galvanized tube 5/16 in. HRS hex shafts spaced every 1 1/2 in. Mounted in 6 1/2 in. x 12 ga. powder-painted steel frame. END DRIVE - Mounted underneath bed section. DRIVE BELT - Endless B-section aramid core v-belt drives each section of conveyor. PRESSURE SHEAVES - 2 1/2 in. dia. with 3/8 in. bore. SNUB RETURN SHEAVE - 3 1/4 in. dia. x 1/2 in. bore flat idler has seven position adjustment. TAKE-UP - Take-up provided to maintain proper v-belt tension. Includes 4 3/8 in. dia. x 5/8 in. bore v-type take- up sheave. BEARINGS - Tread rollers have pre-lubricated, self- aligning ball bearings. Flange and pillow block bearings are sealed, and pre-lubricated with eccentric lock collar. MOUNTING BRACKET - Bracket is supplied to attach spur to side channels of 138-ACC conveyor. BUTT COUPLINGS - Standard for connecting 138-ACC and 138-LRC. SPEED REDUCTION - Sealed worm gear C-face speed reducer. No. 50 roller chain to drive sheave. MOTOR - 1/2 HP, 208/230/460/575V, 3 Ph. 60 Hz. Totally enclosed. CONVEYING SPEED - Constant 65 FPM. CAPACITY - 150 lbs. total distributed live load. FLOOR SUPPORTS - Supplied as optional equipment. FLOOR SUPPORTS - LS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above LS-6 support. BED LENGTHS - 57 in. and 63 in. Drive not available on all lengths and widths. Contact factory. CONVEYING SPEED - Other constant and variable speeds from 25 to 120 FPM. Note: Capacity affected with speed change. SIDE MOUNTED DRIVE - Motor reducer unit mounted to side of conveyor. Minimum elevation with standard sheave retainer 11 1/16 in. O-RING DRIVE CHAIN - With sealed-in lubricant (recommended for applications that do not permit regular lubrication). GUARD RAILS - Adjustable Universal Channel Guard Rail, fixed channel, type A and B angle. See Accessory section. Note: If product comes in contact with guard rails, product flow will be affected. POLY-TIER SUPPORTS - 36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. CEILING HANGER - 5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. SLAVE-DRIVEN - Standard drive may be omitted and spur slave-driven from 138-ACC. Specify by sketch, location of slave connection. Minimum elevation: 10 1/2 in. MOTOR - Energy efficient, single phase, brakemotor, other characteristics. 1/2 HP maximum. ELECTRICAL CONTROLS - Non-reversing or reversible magnetic starters and push-button stations. AC variable frequency drive.

Optional Equipment Standard Specifications

138-LRSS