SORTATION SLIDING SHOE SORTER

8.4-1 Contact Customer Care at 1.844.4HYTROL

PROSORT 1422 & 1432

High-Speed Sortation Conveyor

The ProSort 1422 is designed to sort products at a 22-degree angle where higher speeds are required and close divert centers are not so critical. The ProSort 1432 is designed to sort products at a 30-degree angle where close divert centers are required. Products are transported on anodized aluminum slats where at a predetermined location, divert shoes move diagonally across the conveyor to push the product onto a take-away line. The ProSort 1400 family of sorters are designed for high speed applications where product diverting needs to be both positive and gentle. 5 Widths Available Dual, Right- or Left-Hand Diverts Available High Sort Rates Anodized Aluminum Slats Adjustable MHS-Type Floor Supports Available *Note: Spur location is measured beyond the end of the section on both the 22-degree and the 30-degree diverts. Sorter Conveying Surface Width Sorter Between Rail Width "BR" Sorter Overall Width "OAW" Induction Bed Width "OAW" Spur Width "OAW" Conveyor Sections Drive (not including gear- motor) Tail (not including induction belt) Induc- tion Takeup Divert section with 22 degree diverter (ProSort 1422) Divert section with 30 degree divert (ProSort 1432) Inter- mediate with no diverter LGTH Wt (lbs.) LGTH Wt (lbs.) Wt (lbs.) LGTH Wt (lbs.) LGTH Wt (lbs.) LGTH Wt (lbs./ ft.) 15" 39" 42" 18" 22" 60" 1708 36" 1112 75 86 792 69 719 6" to 120" 111 21" 45" 48" 24" 28" 1780 1165 95 101 957 80 893 120 27" 51" 54" 30" 34" 1847 1218 114 116 1135 90 1024 128 33" 57" 60" 36" 40" 1914 1272 133 131 1326 100 1164 136 39" 63" 66" 42" 46" 1984 1325 153 146 1602 111 1321 145 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. Weights listed in conveyor sections include chain, slats, and shoes used in the section. Gearmotor Weight HP lbs. 5 198 7.5 243 10 283 15 454 20 489 25 676 30 711 40 950 Gap Requirements Based on Package Width ProSort 1422 ProSort 1432 Package Width Minimum Product Gap Package Width Minimum Product Gap Up to 13" 16" Up to 10" 16" >13" to 26" 22" >10" to 20" 22" >26" to 40" 26" >20" to 30" 26" - >30" to 40" 32" Note: ProSort 1422 requires that the catenary section be either an intermediate or a single divert (with the spur and drive on opposite sides). ProSort 1432 requires that the catenary section be either an intermediate or a single divert (with the spur and drive on opposite sides) OR that a reverse mounted gearmotor be used. LEARN MORE Conveyor shown in green with optional supports Standard color options: